ECM/Classika II - Settings PID
-
- Posts: 45
- Joined: 10 years ago
Good afternoon! I am a new member of the HB, I wonder if anyone has the settings of the PID of Classika II 220v, so I compare the settings of my machine. I believe she is taking enough to get the value set in the PID. In that case I would check with the factory settings of the PID.
For you to have an idea of the time:
Time to arrive at the value set in the PID, considering the machine starting from the cold mode - 26 minutes
Time between extractions to reach the set value in PID - 1 minute and 50 seconds
A hug.
For you to have an idea of the time:
Time to arrive at the value set in the PID, considering the machine starting from the cold mode - 26 minutes
Time between extractions to reach the set value in PID - 1 minute and 50 seconds
A hug.